Click on More Printers. Click on the IP address to highlight it. Once the printer has been selected and you have clicked Next , you will be asked to select the network communication type. Voir la liste des appareils compatibles. For more information and for registration, please click here. Restore the printer to the default settings then click Start Again:.

Nom: driver epson stylus sx230
Format: Fichier D’archive
Système d’exploitation: Windows, Mac, Android, iOS
Licence: Usage Personnel Seulement
Taille: 53.17 MBytes

Check that the printer name is correct. Another window will open, click on the pull-down menu and select one of the following: Quels appareils supportent Epson iPrint ver 4. You will need the SSID of your network to hand. Epson iPrint ver 4.

For more information on how Epson treats your personal data, please read our Privacy Information Epsom. Mac OS X This article explains how to set your printer up in the Infrastructure wireless mode. This article assumes that you are installing your printer onto the computer for the first time. A wireless access point is required for infrastructure mode wireless networking. In Infrastructure mode, the transmission xs230 the computer and printer is via an access point.

This is temporary connection used to configure the printer. You will be prompted to remove the cable when configuration is complete.

driver epson stylus sx230

If you don’t have access to a LAN port on your wireless router, access point, or hub, connect the printer’s Ethernet cable directly to your computer’s LAN port. To use this configuration method, your computer must be connected to the network wirelessly, and your computer’s Ethernet connection must be set to obtaining an IP Address automatically. For the B40Wyou should instead press and hold the Wi-Fi button for about 10 seconds.

The installation will fail if the Epson software is blocked. When installing the printer you may see this Windows firewall warning screen. If you did click on the Keep Blocking button click here to view the FAQ for adding firewall exceptions to fix the problem. If you use commercially available antivirus software and see a firewall warning for EasyInstallcreate an exception for EpsonNet EasyInstall to allow it to carry out network configurations.

If your wireless router or access point supports automatic WPS or SES setup mode, click here to view the relevant support article. If you see the following pop-up message, click OK to continue.

It may take up to 90 seconds for your computer to find the printer on the network. If your printer does not appear, click on srylus Refresh button.

If you see the message « The printer was not found » make sure the printer is ex230 on and check that the wireless router, access point, or hub is on and Ethernet cable is connected properly. For All-In-One products, click here for some simple instructions. For the B40Wpress and hold the Wi-Fi button for 10 seconds. This is the same encryption key as used by other devices that connect wirelessly to your network such styllus a laptop or computer.

If an encryption key is not set, you will not see this screen. Enter your WEP Key in the two fields. Enter the WPA passphrase into the two fields. If your passphrase contains drivef or lowercase characters, ensure you enter them correctly. If you need to specify an IP Address as may be required on a corporate networkclick on the Change button. Select ‘ Set the IP address manually advancedand click on Next. Enter the IP Address, subnet mask, and default gateway, then click Next.


If you allow access sfylus the network, and then connect the product locally via USB, the memory card slots can’t be seen. Restore the printer to the default settings then click Start Again:. Follow the ddriver appropriate to your computer’s operating system. In this step you will finalise the installation and configuration of the printer or All-In-One. Failure to follow this step will result in the printer or All-In-One not being ready to print or scan.

The stglus has finished and the product is ready to use.

Liens directs

Click Finishand then disconnect the Ethernet cable from the printer and your access point, wireless router, hub, or computer. Follow the on-screen instructions. When you see this screen, click Finish. You can now disconnect the Ethernet cable.

Support & Downloads – Epson Stylus SX – Epson

Do not select the one with Bonjour in the Kind column. If the printer does not appear, check the printer is powered on and network connection is possible. Your printer should appear in the list, then click Add.

If you receive a « Printer not stjlus error, check the IP Address which can be found on the network status sheet. For instructions on how to print a status styllus see the Related Articles section or click here.

If you have an inkjet printer, the setup is now complete. If the IP Address is not listed, ssx230 can select the option Enter address. Type in the printer’s IP Address which can be found on the network status sheet.

If the printer’s IP Address changes, you will need to repeat steps to reconfigure the Epson Scan network sc230. Not signed in yet? We respect your privacy. Your email address or other details will never be shared with any 3rd parties and you will sthlus only the type of content for which you signed up. You can unsubscribe at stlyus time with a click on the link provided in every Epson newsletter.

If you would like to register as an Epson partner, please click here. Not yet an Epson partner? For more information and for registration, please click here. We use cookies on our website. By continuing to browse our website, you agree to our use of cookies. For more information on how we use cookies and how to manage your preferences go to Cookie Information.

Find a repair centre close. Contact Us Submit your contact details below and an Epson expert will be in touch: Return back to support options for Epson Stylus SX How to set up and add the printer to a wireless network Infrastructure mode Ssx230 the printer for the first time. Epson products with integrated Wi-Fi connectivity no external print server: Before following this article please check that you have access to the following items: Home wireless routers all feature a built-in access point to support infrastructure mode.


On an unprotected network, your data may be vulnerable to third party interception, etc. Do not turn off the power or unplug the printer while making settings on the control panel. Doing so may cause malfunction. Do not change network settings while accessing the memory card. Setup the printer Ensure the printer is powered on. Connect the other end to any available LAN port on your wireless router, access point, or hub.

driver epson stylus sx230

Driveg ensure that the installation works correctly click here for some simple instructions to follow before starting to install the stylsu.

Start by checking that you are connected to the Wireless Local Area Network you want to add the printer to. If you only connect to one Wireless Local Area Network, then a good indication of this is if Internet access is available. The Epson install menu should appear, follow the on-screen instructions: Select the required language.

Télécharger Pilote Epson Stylus SX Driver Et Installer Gratuit

Check that the selected printer model is correct. Click Next to continue. Read the Software License Agreement carefully.

driver epson stylus sx230

To continue, click the radial beside Agree and then click Next. The next screen will check the install mode that you want to use i.

For home users, we recommend that you select the Easy Install option. All the software in the Required box will be installed as it is necessary. You will be asked if you want to install the ‘ Recommended ‘ software. Click Install to continue. The drivers and software will now be installed: Select Network as the connection method, and then click Next. The next screen refers you to the Network Settings manual, for more instructions to follow during setup.

This will launch the Epson Easy Network Setup wizard. Your firewall or anti-spyware software may display warnings during the installation. For Mac OS X: Configure your firewall software to allow network access for EpsonNet EasyInstall.

Quick Links

At the next screen, select the option « Set up this printer for the first time ». At the next screen, you will need to select the connection method. Make sure that the printer’s Ethernet cable is still connected. This should only be selected if your wireless router, access point, or hub does not have a LAN port; or for advanced e;son who require the use of a crossover cable and the ability to manually assign IP addresses to the computer and printer.

You may see epzon pop-up message below. Ensure that the Ethernet cable is connected, and click OK: